UPDATE: Apologies for taking so long to finish this post!
Click here to read Part 1 first.
So how does it run?? Smokin’ is all I’ve got to say! This is an awesome beast of a machine. I’m sure with some more money, time and attention to overclocking detail I could get even more out of her, but I’m happy with what I’ve achieved.
Windows Experience Index (WEI)
This is what you’re really wanting to see isn’t it? Well here it is:
I’m not surprised by the 7.8 on the graphics card as it’s nowhere near a top line card, but I was by the Processor score. Maybe you need something even more to pull a 7.9 there. But the Primary Hard Disk score of 7.9 was exactly what I was after.
So lets break it all down a little…
Here is a look at the system under a full load with the CPU overclocked to a speedy 4.72Ghz.
Not a bad increase up from the stock 3.40Ghz. Remember that while I’m using the Corsair Water cooling unit, it is still using fan based cooling, not refrigeration based chilled water. I tried pushing to 4.80Ghz but the system wasn’t stable. It would POST and boot into Windows, but usually after about 5mins it would crash and blue screen. I ran Core Damage overnight as shown with Normal Priority threads @ 4.72Ghz and the system was rock solid. Core temps were around the 70C mark.
So I know that I have a solid stable system that is nice and fast, and doesn’t get too hot. It’s interesting to see that even though I bought so called “Value” labelled RAM kits, they performed brilliantly, and didn’t impact the WEI score at all.
I ran some tests using a number of different tools in order to get the most accurate view of what is really going on with the RAID 0 setup. The following tools made up the list:
- AS SSD Benchmark v1.6.4067
- ATTO Disk Benchmark
- CrystalDiskMark v3.0.1
- HD Tune Pro v4.61
Breaking the 1,000MB/s barrier was my goal – I had thought this was possible in theory if I used RAID 0; but now I’ve proved my hypothesis. Niiiice! 🙂
I’ve been running the system now for well over a year and a half and it’s never let me down. I’ve subsequently moved to SSD’s on all my other systems and it is just heaven.
One last thing…
With that in mind though, just remember that all hard drives DO fail at some point. And SSD’s are no different… except when they fail, they die stone cold dead! There is no tell tale clicking sign or funny data reads etc… You just go to use it one day and it’s dead. So make sure you have a good, reliable daily backup (and [offsite] backups of your backups!). Even more importantly, make sure you have tested your backups and can recover them successfully.